Coconut Shell Charcoal Making Machinery For Charcoal Production

Charcoal is really a black, lightweight residue composed of carbon and ash obtained by removing water along with other unstable constituents derived from vegetable or animal sources. The development process involves a slow pyrolysis which is the heating of substances to some quite high temperature in the lack of oxygen. Common Charcoal is made out of coal, peat, wood, petroleum, or coconut shells.

Charcoal can be used as heating or perhaps for cooking fuel but has lots of other uses. Compressed charcoal can be used in pencils, gun powder and powdered charcoal can be used for medicinal purposes, for instance charcoal capsules for digestive problems. A recently available discovery is charcoal can change unproductive soil into productive, carbon-rich soil.

Coconut Shell Charcoal Making Machinery

Modern strategies for charcoal making include the employment of retorting technology which is actually a procedure of heat recovery solely offered by the combustion of gas that is certainly released in the carbonization process. The properties of your finished products depend upon the sort of material charred, in addition to around the charring temperature. In order to produce a high purity charcoal product, the source material has to be clear of non-volatile substances.

The raw materials employed for bio charcoal production may be anything including straw, bark, twigs, sawdust, corn cob, bamboo sawdust, factory sawdust, wood scraps from furniture, or coconut shells. Producing charcoal from natural raw materials will work for environmental protection and the re-consumption of agricultural waste materials is often supported and advocated by governments.

Coconut Shell Charcoal Making Machinery to generate charcoal from coconut shells includes:

1. Crusher Machine

2. Drying Machine

3. Briquette Extruder Machine

4. Carbonizing Machine

Coconut Charcoal Machine Production Line

1. The Crushing machine can be used to destroy down material that may be greater than 5.5mm. Any pieces that are greater than 200mm need to be broken down into smaller sizes of 5.5mm before processing inside the Crusher.

2. The Drying machine is used once the moisture level of the raw material is above 12%. The moisture level needs to be reduced to between 6% and 8% (for instance the dryness of sawdust) before it can be processed further from the Briquette Extruder machine. The production could be created to meet the requirements of clients, for example making sawdust into half-charcoal sticks. The Drying machine is equipped with an auto controlling home heating system and can be used for other purposes for instance a water boiler or even a heater to warm a residence.

Dependant upon the dimensions of the appliance it could handle from 300 – 500kg, 900 – 1200kg, or 1300 – 2,100kg of raw materials measuring between 3 – 5mm. Temperatures reached vary between 180°C - 250°C. the motor power of your three different sized machines vary from 4Kw to 5.5.Kw, to 7.5Kw. The weights are: 1200kg, 1600kg, and 2100kg. Sizes are: 10m x 1m x 2m 15m x 1m x 2m 21m x 1.2m x 2.5m.

3. The Briquette Extruder machine

The development might be built to meet the criteria of consumers, for example making sawdust into half-charcoal sticks. It is equipped with an automobile-controlling home heating system and motor power ranges between 11kw, to 15kw, to 18kw for that different sizes of machines and weighs from 800kg, to 1000kg, to 1200kg. The measurements are: 1,630mm x 600mm x 1,260mm or 1,860mm x 800mm x 1,360mm or 2,100mm x 1,000mm x 1,560mm.

4. The carbonizing machine is commonly used to transform the half-charcoal sticks into a finished product. The appliance is equipped with a hyperploid steam cooling, high-temperature system. The cooling process might be accelerated as a way to speed up the rate of production. The device are equipped for around 1500kg at the temperature of 430°C. It comes with a 1.5kw motor and weighs 2,500kg and can produce finished products in 8 – twenty four hours.

These machines undergo a 100% QC inspection before shipment and provide good quality 100% guaranteed post sales service.